Highlights
The ace module can work independently or along with up to 16 slave modules.
Units with V type heat exchanger: panels, frame and base are produced using excited steel secured with polyester powder painting to guarantee absolute protection from barometrical specialists.
3-stage scroll type blower, with built-in thermal over-burden cut-out and crankcase heater, mounted on elastic vibration dampers.
Outside rotor type axial fans, outfitted with three phase direct drive engines, low clamor 8 poles, insurance level IP54, furnished with a defensive outlet grille.
Evaporator built with high proficiency Shell and tube type heat exchanger, processing plant protected with adaptable close cell material.
Condenser worked with consistent copper tubes precisely ventured into blue hydrophilic aluminum fins.
Refrigerant circuit total with charge valves, channel drier, sight glass, gas-fluid separator, thermostatic development valve, high and low weight switch. The warmth siphon unit is finished likewise with 4-way valve, fluid receiver and one way valve.
Pressure driven circuit built with electrifies pipe, total with water release connection for tube in tube heat exchanger and rib type hydraulic connectors in two bearings easy for connections from the two sides of the units.
Electric board comprise of:
blower contactor, fan engine contactor, blower assurance breaker, fan insurance breaker, stage arrangement transfer and chip with work display (display just for ace/bundled unit)
Programmed activity drastically diminishing support cost on account of solid microchip framework.
Discretionary
Oar stream switch;
Metallic filter for water powered circuit;
Water siphon;
Elastic antivibration mounting.
Warmth recuperation capacities
Technical Data
*Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a clear field.
*Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a clear field.