The tent packaged unit was developed in a general sense to give air cooling in tents or mobile structures. It gives more important comfort just as shields rigging and materials from rankling atmosphere hurt.
The tent packaged unit is fitted with versatile channel and the unit itself must be arranged outside. The limit of the tent packaged unit relies upon a cooling circuit and mind blowing fans. The evaporator section contains the evaporator and a centrifugal fan, which draws warm inside nature of the tent through the cold evaporator and covers the cooled air through the side or the top of the unit. The condenser section contains two condenser coils and a large axial fan, reestablishing the glow taken from the inward air to the outside air.
The tent packaged unit also have heat pump, can provide warm air into the tent in winter. Use the Panasonic scroll compressor, Amrta tent packaged unit can provide hot air at - 10oC to 20oC.
- Self-contained packaged design
Easy installation with just connecting condensate drainage and electrical power supply, equipped with connecting plug.
- Special unit structure design
The tent wall can be installed in between of evaporator and condenser with the gap of 100-150mm.
- Plenum chamber
3 meter height with better air circulation and strong air flow.
- Digital controller
LED display, timer display, fan speed display, temperature display, error code display, mode display.
- Long distance air supply
High external static pressure (max 350pa) with 30 meter air throws.
- Easy upkeep
Air filter is adequately decimated and cleaned.
Structure
Technical Data
Notes:
Nominal cooling capacities are based on the following conditions:Indoor temp: 27°CDB, 19°CWB; Outdoor temp: 35°CDB;
Actual noise level may differ, depending on the room structure, etc, since these noise values are from an anechoic room.