Features
Structure
The expert module can work independently or alongside up to 16 slave modules.
Units with V type heat exchanger: panels, frame and base are delivered utilizing charges steel made sure about with polyester powder painting to ensure total assurance from climatic masters.
Blower
3-phase scroll type blower, with built-in thermal over-trouble cut-out and crankcase heater, mounted on versatile vibration dampers.
Center point fan
Outside rotor type axial fans, equipped with three phase direct drive motors, low uproar 8 poles, affirmation level IP54, gave a protective outlet grille.
Evaporator
Evaporator built with high adequacy Shell and tube type heat exchanger, preparing plant secured with versatile close cell material.
Condenser
Condenser worked with reliable copper tubes accurately wandered into blue hydrophilic aluminum fins.
Refrigerant circuit
Refrigerant circuit complete with charge valves, channel drier, sight glass, gas-liquid separator, thermostatic augmentation valve, high and low weight switch. The glow siphon unit is done in like manner with 4-way valve, liquid receiver and one way valve.
Water driven circuit
Weight driven circuit built with energized line, complete with water discharge connection for tube in tube heat exchanger and rib type hydraulic connectors in two headings easy for connections from the different sides of the units.
Electric board
Electric board involve:
blower contactor, fan motor contactor, blower protection breaker, fan affirmation breaker, stage progression hand-off and computer chip with work display (display only for pro/packaged unit)
Modified action altogether reducing help cost on account of reliable CPU structure.
Technical Data
*Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a clear field.
*Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
** Ambient temperature DB 7 ºC, WB 6 ºC; condenser water in/out temperature 40/45 ºC;
*** In the nominal water flow condition the pressure drop is between this range.
**** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in a clear field.